|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Greenhouse
Indoor Garden
Exhaust Fans
|
|
|
|
ActiveAir
Shaded Pole Blower Exhaust Fans
Popular 'squirrel cage' fans, technically known as shaded pole blowers, quickly exhaust stale air out of hobby greenhouses and growrooms while bringing fresh, clean air in. Mount securely to wall or ceiling. Quiet, powerful performance; exclusive duct hose adapter flange; safety intake grill; grounded 8-foot heavy-duty power cord. Instructions for horticultural use included. UL and CSA Listed. Figure size needed for general room exhaust by taking cubic feet of room and dividing by 5. Fan with cubic feet per minute (CFM) rating just above the result will completely exhaust stale air in 5 minutes as recommended. |
|
|
|
 |
ActiveAir 60CFM Blower System
Great for small cold frames up to 20 inches by 96 inches. Exchanges air in a 100 cubic foot room in less than two minutes. 60 cubic feet per minute output. Heavy duty grounded power cord. No intake flange. 3 hole round output flange. Motor Hp: 1/40 th. Amperage Draw: 0.93 |
|
|
|
|
Order #60CFMACTIVEAIR
ActiveAir
60 CFM
Blower System
84.95 |
|
|
|
|
|
|
|
 |
ActiveAir 95CFM Blower System
For medium inflation jobs and exhausting air outside. Exchanges air in a 200 cubic foot room in two minutes. 95 cubic feet per minute output. Heavy duty grounded power cord. 4-inch diameter duct intake flange. 4 hole square output flange. Motor Hp: 1/80 th. Amperage Draw: 0.5 |
|
|
|
|
Order #95CFMACTIVEAIR
ActiveAir
95 CFM
Blower System
89.95 |
|
|
|
|
|
|
|
 |
ActiveAir 180CFM Blower System
For large inflation jobs and exhausting air outside. Exchanges air in an 800 cubic foot room in 4.5 minutes. 180 cubic feet per minute output. Heavy duty grounded power cord. 4-inch diameter duct intake flange. 4 hole square output flange. Motor Hp: 1/80 th. Amperage Draw: 0.5 |
|
|
|
|
Order #180CFMACTIVEAIR
ActiveAir
180 CFM
Blower System
95.95 |
|
|
|
|
|
|
|
|
|
 |
ActiveAir 265CFM Blower System
For fan powered air cooling on larger lighting systems and air exhausting. Exchanges air in an 1200 cubic foot room in 5 minutes. 265 cubic feet per minute output. Heavy duty grounded power cord. 4-inch diameter duct intake flange. 4 hole square output flange. Motor Hp: 1/33 th. Amperage Draw: 1.1 |
|
|
|
|
|
|
Order #265CFMACTIVEAIR
ActiveAir
265 CFM Blower System
102.95 |
|
|
|
|
|
|
|
|
|
|
|
 |
ActiveAir 465CFM Blower System
For extra large air cooling jobs and air exchanging. Exchanges air in an 2200 cubic foot room in 5 minutes. 465 cubic feet per minute output. Heavy duty grounded power cord. 4-inch diameter duct intake flange. 6 hole rectangular output flange. Motor Hp: 1/40 th. Amperage Draw: 2.2 |
|
|
|
|
|
|
Order #465CFMACTIVEAIR
ActiveAir
465 CFM Blower System
113.95 |
|
|
|
|
|
|
|
|
|
|
|
ActiveAir
Outflow Flange
These fan to 4-inch duct adaptors attach to the |
 |
|
|
|
|
|
| out-flow side of the 95CFM, 180CFM, 265CFM or 465CFM ActiveAir Exhaust Fans (above) for in-line exhaust applications. |
|
|
|
|
|
|
Order #LG50028
ActiveAir
Outflow Flange
For 95 / 180 CFM Blower Fan
9.95 |
|
Order #FANADA265
ActiveAir
Outflow Flange
For 265CFM Blower Fan
9.95 |
|
Order #FANADA465
ActiveAir
Outflow Flange
For 465CFM Blower Fan
11.95 |
|
|
|
|
|
|
|
|
|
|
|
Non-insulated Aluminum
Air Ducting
Ideal for cooling HID lamp reflectors and exhausting and/or redirecting heat from the growing environment. Can also be used in numerous heating, ventilating, and exhaust applications.
Class 1 flexible air ducting is made from tough, puncture resistant 3 ply aluminum foil laminate and contains a high |
|
|
|
|
|
|
density, corrosion resistant wire helix in the duct wall for structural integrity.
Available in 4-inch, 6-inch, 8-inch, 10-inch and 12-inch diameters. Includes 25 feet of ducting that can easily be cut to any desired length. Includes two stainless steel duct clamps, extra clamps are sold below. |
|
|
|
|
|
|
Order #FANDUC4IN
Non-insulated
4-Inch Diameter
Aluminum Air Duct 25Ft
19.95 |
|
Order #FANDUC6IN
Non-insulated
6-Inch Diameter
Aluminum Air Duct 25Ft
24.95 |
|
Order #FANDUC8IN
Non-insulated
8-Inch Diameter
Aluminum Air Duct 25Ft
32.95 |
|
Order #FANCUC10IN
Non-insulated
10-Inch Diameter
Aluminum Air Duct 25Ft
39.95 |
|
Order #904185
Non-insulated
12-Inch Diameter
Aluminum Air Duct 25Ft
49.95 |
|
|
|
|
|
|
|
|
|
|
|
Hydrofarm Light System
Cooling Adaptor Kit
LGCKT2
The Hydrofarm Light System Cooling Adaptors allow you to exhaust or redirect heat straight from the reflector when connected to an ActiveAir Exhaust Fan. |
|
|
|
|
|
|
These versitile adaptors accept four inch air ducting (above) for efficient cooling of enclosed growing areas such as hobby greenhouses and indoor gardens.
The Light System Cooling Adaptors fit all vents on the Radiant Reflector, all vents on the Radiant Remote Ballast, all vents on the DayStar Reflector, all vents on Sunburst Compact grow light systems, and the top and rear vents of the Super Grow Wing Reflector (does not fit front louvered vent on SGW).
Kit includes two 4-inch rectangular flanges, one rectangular vent cover, and all necessary mounting hardware. |
|
|
|
|
|
|
|
Order #RADAIR
Hydrofarm Light System
Cooling Flange Kit
LGCKT2
21.95 |
|
|
|
|
|
|
|
|
|
|
|
Hydrofarm Light System
Rectangular Cooling Flange
4-Inch Diameter
LG50023
The Hydrofarm Light System Rectangular Flange fits the Hydrofarm Radiant Reflector and Remote Ballast; the DayStar Reflector; the Super Grow Wing Reflector; and the Sunburst Compact HID Lighting Systems, and allows you to exhaust or redirect heat straight from the heat |
|
|
|
|
|
|
| source when connected to an ActiveAir Exhaust Fan or similar squirrel cage type exhaust fan. These versatile adaptors accept common four-inch diameter air ducting for efficient cooling of enclosed growing areas such as hobby greenhouses and indoor garden rooms. |
|
|
|
|
|
|
Order #LG50023
Hydrofarm
Rectangular 4-Inch
Cooling Flange
LG50023
9.95 |
|
|
|
|
|
|
|
|
|
|
|
 |
Hydrofarm Light System
Rectangular Reflector
Vent Cover
LG50027
The Hydrofarm Light System Rectangular Reflector Vent Cover fits the Hydrofarm Radiant Reflector; the DayStar Reflector; and the Sunburst Compact HID Lighting Systems; blocking unused vents on these reflectors will provide for more efficient cooling capability. |
|
|
|
|
|
|
Order #9865233
Hydrofarm
Rectangular 4-Inch
Reflector Vent Cover
LG50027
4.95 |
|
|
|
|
|
|
|
|
|
|
|
 |
Sunlight Supply Sun System®
Universal Air-Cool Duct Fittings
Use these reflector adaptors to attach 4-inch diameter ducting to Sunlight Supply reflectors including the Large Super Horizontal Reflector, the SunGro Reflector, the Super Spectrum Reflector, and the Mid-Size Super Horizontal Reflector. These adaptors will not work with the Sunlight Supply Super Sun Reflector. |
|
|
|
|
|
|
Order #AIRLGCOOL2
Sunlight Supply
Universal Air-Cooled
Duct Fittings (Set of 2)
16.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
