|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Greenhouse
Indoor Garden
Climate Control & Irrigation
Timers & Photosensors
|
|
|
|
|
 |
Green Air Products
Cyclestat-4P
Repeat CycleTimer
with Photosensor
The Cyclestat-4 is Green Air Products' most recent development in timing control. The Cyclestat-4 repeat cycle timer has solved the age old problem of accurate short cycle timing. Perfect for plant zone environments, reptile habitats or any other application requiring automatic short cycle switching. No programming required. |
|
|
|
Easy to set and operate, the Cyclestat-4P features a microprocessor time counter with adjustable frequency and duration.
The Cyclestat-4P timer has many uses. Only a few of them include: fogging or misting, spray stakes or drip system timing, air pumps, CO2 equipment and intake or exhaust fan control. The Cyclestat-4P may be set for interval and cycle of timed events. Interval is the time between the "On" and "Off" cycles.
The interval knob may be set from 7 minutes to 8 hours. Set this for desired time between functions. Cycle is the length of time that a specific function or condition must be maintained. Cycle may be set from 5 seconds to 30 minutes.
Automatic reset feature allows function synchronizing with other system controls. Turn the switch off and on again for manual operation. The unique feature of the Cyclestat-4P is a built-in photosensor to defeat timing during darkness hours. The photosensor can be switched on or off as desired. The Cyclestat-4P timer utilizes a duplex cordcap which provides a combination plug and receptacle power cord design. Operates on 120 volts AC with a 15 amp switching capacity. For complete operating instructions and usage examples, click here. Fully listed by Canadian and United States Underwriters Laboratories (CuLUS).
PLEASE NOTE: Many Green Air Products systems are built to order by the manufacturer. Please allow up to 2 weeks delivery time. Green Air Products do not qualify for express shipping options. |
|
|
|
|
|
Order #0016501
Green Air Products
Cyclestat-4P
Repeat Cycle Timer
with Photosensor
189.95 |
|
|
|
|
|
|
|
 |
Green Air Products
Model CST-1
Model CST-1P
Model CST-1S
Model CST-1SP
Repeat Cycle Timers
The CST-1 has solved the age old problem of accurate short cycle timing. The only unit of it's kind designed specifically for the control of grow systems. Easy to set and operate. Solid state time counter with adjustable frequency and duration. The CST-1 function timer has many uses and only a few of them include: fogging or misting, spray stakes or drip system timing, air pumps, CO2 equipment and intake or exhaust fan control.
The CST-1 may be set for frequency and duration of timed events. Frequency is the time between the "On" and "Off" cycles. The frequency knob may be set from 7 minutes to 8 hours. Set this for desired time between functions.
Duration is the length of time that a specific function or condition must be maintained. Duration may be set from 5 seconds to 30 minutes. Reset feature allows function synchronizing with other system controls. Right side of timer operates short cycle "On" times and left side outlets are "On" when right side is "Off". |
|
|
|
|
|
This feature provides an interesting variety of timing combinations. The CST-1 is also available with an optional photo sensor to limit operation to daylight periods only (CST-1P); or with an optional built-in solenoid for emitter system timing (CST-1S). Also available with both the optional photosensor and solenoid (CST-1SP). Operates on 110 VAC with 15 Amp switching capacity. For complete operating instructions and usage examples, click here.
PLEASE NOTE: Many Green Air Products systems are built to order by the manufacturer. Please allow up to 2 weeks delivery time. Green Air Products do not qualify for express shipping options. |
|
|
|
|
|
|
|
Order #0016502
Green Air Products
Model CST-1
Repeat Cycle Timer
274.95 |
|
Order #CST1P
Green Air Products
Model CST-1P
Repeat Cycle Timer
with Photosensor
304.95 |
|
Order #0016505
Green Air Products
Model CST-1SP
Repeat Cycle Timer
with Solenoid
and Photosensor
389.95 |
|
|
|
|
|
|
|
|
|
|
|
 |
Green Air Products
Model PS-1
Photo Switch
A great alternative to electronic or mechanical timers. The PC-1 has no moving parts to wear or break. It eliminates timers and clocks to synchronize and no settings or adjustments are necessary. This controller senses the presence of light and switches outlet functions accordingly. PC-1 has a "Day Power" and "Night Power" outlet. It will turn day time systems "On" when it senses the sunrise or artificial lighting and operate night time equipment when it doesn't. |
|
|
|
|
|
Operates on 110 VAC with 10 Amp switching capacity. Simply plug the PC-1 into any standard 110V AC wall outlet or the equipment side outlet of any atmospheric controller.
Plug the unit that you want to control into either the day or night side of the PC-1. CO2 equipment would be plugged into the day outlet (right side). Allow 3 minutes for switching and reset. For complete operating instructions and usage examples, click here. Fully listed by Canadian and United States Underwriters Laboratories (CuLUS).
PLEASE NOTE: Many Green Air Products systems are built to order by the manufacturer. Please allow up to 2 weeks delivery time. Green Air Products do not qualify for express shipping options. |
|
|
|
|
|
|
|
Order #0016507
Green Air Products
PS-1
Photo Switch
159.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
