|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indoor Plant Grow Light
HID Horizontal Lamp Reflectors
by Hydrofarm®
|
|
|
|
DayStar Standard
Horizontal HID Lamp Reflector
by Hydrofarm® |
|
|
|
| The Daystar HID Lamp Reflector evolved from Hydrofarm's GLX commercial greenhouse reflector. The greenhouse challenge is to offer not only the most uniform lighting pattern for crops, but also the most efficient lighting systems possible so that the crop can get to market at the lowest possible production cost. There is no room for poor performance in any way. |
|
|
|
|
|
|
|
|
This reflector has been compared head-to-head with all the other fixtures on the market by growers buying hundreds of lights and has been the clear winner time and time again!
The Daystar Reflector series offers the brightest, most uniform light delivery and has proven to be an extremely effective reflector, especially for 1000 watt sodium and halide lamp systems.
The Daystar Reflector is cool to the touch thanks to its patented double-wall design and 3-way convection air cooling. An extremely low profile allows for more vertical clearance. The multi-faceted computer designed aluminum interior is imported from Europe, made from the world's finest specular aluminum that is 98.5% pure with a 95% reflectivity factor.
Daystar Standard Reflectors measure 7 1/8 inch high by 12 1/2 inches wide by 18 1/2 inches long. |
 |
|
|
|
| Completely compatible with all Hydrofarm Remote Ballast Enclosures equipped with the Hydrofarm All System Socket Assembly (not included). The Daystar Standard HID Lamp Reflector accepts 400, 430, 600 and 1000 watt sodium bulbs as well as 400 and 1000 watt halides. The Daystar Reflector works with the Hydrofarm All System Socket assembly, available here. |
|
|
|
An optional tempered lens is necessary when using ActiveAir cooling, but also keeps bulb clean and protects from water.
Flexible cooling options allow you to redirect or exhaust excess heat by adding the LGCKT2 Cooling Kit (purchase below) for efficient fan-powered exhaust cooling or heat redirection, including the capability to exhaust multiple lamps in-line through a single ActiveAir exhaust fan.
Unlike most reflector designs, the standard DayStar Reflector cooling flange positions are located on the sides of the reflector, as opposed to the ends. This positioning can be especially convenient for cooling several lamps with a single exhaust fan if you are running multiple units in a side-by-side configuration. |
Optional ActiveAir
Exhaust Fans
Optional Light
System Cooling Kit |
|
|
|
|
|
|
Order #DAYREFG
Hydrofarm
Daystar Standard
Horizontal HID Lamp Reflector
with Tempered Lens
134.95 |
|
Order #DAYREF
Hydrofarm
Daystar Standard
Horizontal HID Lamp Reflector
No Lens
124.95 |
|
Order #DAYREFGLA
Hydrofarm
Daystar Standard Reflector
Tempered Lens
19.95 |
|
Order #RADAIR
Hydrofarm Light System
Cooling Flange Kit
LGCKT2
21.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
DayStar AC Air Cooled
Horizontal HID Lamp Reflector
with Six-Inch Ducts
by Hydrofarm®
|
|
|
|
|
|
|
| The Daystar AC is the answer for those wanting high-performance coupled with maximum air cooling potential. Utilizing the same patented double wall design and reflective material as Hydrofarm's flagship Daystar reflector, the "AC" adds two 6-inch diameter flanges for cooling air flow from an optional fan. |
|
|
|
|
|
|
| The 6-inch diameter flange encompasses most of the tunnel-like interior of the reflector ensuring more complete air flow than common air cooled units. This combination allows for closer plant placement, plus better growth, and imporved ability to control growing area temperatures. |
|
|
|
|
|
| Newly incorporated features include a built-in mogul socket with a 15 foot long lamp cord that fits any Hydrofarm remote ballast assembly for faster, easier installation. |
|
|
|
|
|
|
Newly incorporated features include a built-in mogul socket with a 15 foot long lamp cord that fits any Hydrofarm remote ballast assembly for faster, easier installation. Also upgraded is the new fully sealed tempered lens system, which provides for unparalleled cooling performance.
The Daystar AC Reflector measures 7 1/8 inch high by 12 1/2 inches wide by 22 1/2 inches long. |
|
|
|
|
|
|
Completely compatible with all Hydrofarm Remote Ballast Enclosures, the Daystar AC Reflector is ideally configured for 1000 watt Metal Halide and HP Sodium HID bulbs, however it accepts 400, 430, and 600 watt sodium bulbs as well as 400 watt halides.
When using with 400, 430 and 600 watt bulbs, the optional bulb extender (available below) is recommended for optimal bulb positioning in the reflector for maximum output to your growing area. The Daystar AC Horizontal HID Lamp Reflector weighs 18 pounds with the included tempered lens and socket. Ducting shown in image is not included, but is available here. |
|
|
|
|
|
|
|
Order #DAYACREF
Hydrofarm
Daystar AC
Horizontal HID Lamp Reflector
with Tempered Lens
164.95 |
|
|
|
|
|
|
|
|
|
|
|
Mogul to Mogul
HID Bulb Extender
The Mogul to Mogul HID Bulb Extender is used to center smaller wattage bulbs in air cooled HID horizontal lamp reflectors with a built-in socket assembly for optimum lamp reflectivity. 600v, 4KV rated. Use with 250, 400, 430, and 600 watt HID bulbs. Not for use with 1000 watt HID bulbs. |
|
|
|
|
|
|
|
|
Order #HFBULBEXT
Hydrofarm
Mogul to Mogul
HID Bulb Extender
9.95 |
|
|
|
|
|
|
|
|
|
|
|
Radiant
Horizontal
HID Lamp Reflector
by Hydrofarm®
The Radiant Reflector is designed to deliver the brightest possible light down to your growing plants. |
|
|
|
|
|
|
The patented double-wall design and generous reflective cavity make it the coolest running reflector on the market. Constructed of heavy-duty pre-galvanized steel and lined with high purity European aluminum, tis premium-quality reflector will give you years of dependable growing performance.
The multi-faceted computer designed aluminum interior is imported from Europe, made from the world's finest specular aluminum that is 98.5% pure with a 95% reflectivity factor. In fact the reflective material is warranted for a full 25 years. The Radiant Reflector accepts all common HID bulb sizes including Hydrofarm's AgroSun halides and sodiums. Easily accepts the ActiveAir cooling system for super cool operation. |
|
|
|
|
|
|
Flexible cooling options allow you to redirect or exhaust excess heat by adding the LGCKT2 Cooling Kit (purchase below) for efficient fan-powered exhaust cooling or heat redirection, including the capability to exhaust multiple lamps in-line through a single ActiveAir exhaust fan.
Optional tempered glass reflector lens also available. Tempered safety lens protects bulb and interior surfaces from water and dust. Unprecedented 25 year reflective material warranty.
Works with the adjustable Hydrofarm All System Socket assembly, available here. Radiant Reflectors will accept sodium bulb sizes including 400, 430, 600 and 1000 watts and metal halide bulbs of 400 and 1000 watts. |
|
|
|
|
|
|
| The Radiant Reflector measures 20.5 inches wide by 21.0 inches long by 9.5 inches tall, exclusive of hangers (included). Reflector weighs 19 pounds along, 24 pounds with tempered lens. Bulb, socket and cord set not included. |
|
|
|
|
|
|
|
Order #RADREFGLA
Hydrofarm
Radiant
Horizontal HID Lamp Reflector
with Tempered Lens
159.95 |
|
Order #RADREF
Hydrofarm
Radiant
Horizontal HID Lamp Reflector
No Lens
144.95 |
|
Order #RADGLA
Hydrofarm
Radiant Reflector
Tempered Lens
24.95 |
|
|
|
|
|
|
|
|
|
|
|
Growzilla
Dual Bulb
Air Coolable
Horizontal
HID Lamp Reflector
by Hydrofarm®
Extreme lighting options from Hydrofarm! A new fully sealed tempered lens system keeps bulbs clean and dry while maximizing cooling efficiency. |
 |
|
|
|
|
|
The ultimate dual bulb HID lamp reflector in a side by side two-bulb configuration. Built-in 6-inch diameter flanges are positioned to provide maximum cooling effect over the bulbs. Produce up to 280,000 lumens from one reflector. Mix and match metal halide and high pressure sodium or burn two of the same type for extreme results. System must operate with ActiveAir cooling system (available separately). Use 6-inch diameter ducting, available here.
The Hydrofarm Growzilla Dual Bulb Air Coolable Reflector measures 21 inches wide by 21 inches long by 9 3/8 inches tall. Comes complete with sealed tempered lens system and hanging hardware. Requires two (2) Hydrofarm All System Socket and Cord Sets, available here. Sockets, bulbs and ballasts not included. |
|
|
|
|
|
|
|
Order #0016352
Hydrofarm
Growzilla Dual Bulb
Air Coolable
Horizontal HID Lamp Reflector with Tempered Lens
189.95 |
|
|
|
|
|
|
|
|
|
|
|
XtraSun® Standard
Horizontal
HID Lamp Reflector
by Hydrofarm®
The XtraSun® Standard Air Coolable Reflector provides a bright and broad spread of light and is fully air coolable withthe purchase of optional 4-inch diameter duct flanges (available below). |
|
|
|
|
|
|
XtraSun® Reflectors are constructed with a rugged pre-galvanized steel housing, and an optional tempered glass lens is available that protects the bulb from dust and water.
The Standard XtraSun® Reflector easily accepts the LGCKT2 Cooling Kit (2 flanges, available below) making it a snap to connect your XtraSun® Reflector to an optional ActiveAir exhaust fan for efficient fan-powered exhaust cooling or heat redirection with 4-inch ducting.
The XtraSun® Standard Air Coolable Reflector is CUL listed, and includes a 5-year warranty on reflective materials. |
 Standard XtraSun Reflector
shown here with optional
cooling flanges.
|
|
|
|
|
|
Accepts Hydrofarm All System Socket and Cord Set, available here. Valuebrite Reflectors will accept sodium bulb sizes including 400, 430, 600 and 1000 watts and metal halide bulbs of 400 and 1000 watts.
Hydrofarm's Standard XtraSun® Air Coolable Reflector measures 21 inches wide by 19.25 inches long by 8 inches high (excluding hangers), and weighs 16 pounds with the tempered lens. |
Optional ActiveAir
Exhaust Fans |
|
|
|
|
|
|
|
Order #VBSTDWL
Hydrofarm
XtraSun Standard
Horizontal HID Lamp Reflector
with Tempered Lens
89.95 |
|
Order #VALERF
Hydrofarm
XtraSun Standard
Horizontal HID Lamp Reflector
No Lens
79.95 |
|
Order #VBLENSYS
Hydrofarm
XtraSun Reflector
Tempered Lens
19.95 |
|
Order #RADAIR
Hydrofarm
Light System
Cooling Flange Kit
LGCKT2
21.95 |
|
|
|
|
|
|
|
|
|
|
|
XtraSun®
Six-Inch AC
Air Coolable
Horizontal HID
Lamp Reflector
by Hydrofarm®
The XtraSun® 6-Inch AC Air Coolable Reflector is super air-coolable, with 6-inch diameter duct flanges positioned directly over a built-in mogul socket assembly that includes a 15-foot lamp cord built right in! |
|
|
|
|
|
|
Features a full specular European pebblestone aluminum reflective material for maximum light bounce and a low profile for maximum use of vertically restricted spaces.
Constructed with a rugged pre-galvanized steel housing, the XtraSun® 6-Inch AC Air Coolable Lamp Reflector features a new and improved completely sealed removable tempered lens system that allows for easy bulb changes, protects the bulb from dust and water, and ensures maximum cooling efficiency. |
|
|
|
|
|
|
Built-in 6-inch diameter flanges direct cooling air flow directly over the bulb, significantly increasing cooling efficiency. Excellent for use in areas where heat build-up becomes an environmental issue. Cooling allows closer lamp to plant tolerance, increasing rate of growth and overall yields.
A newly redesigned integrated sealed tempered lens system, provides maximum effeciency for cooling and heat redirection. Use 6-inch diameter ducting, available here.
The XtraSun® 6-Inch AC Air Coolable Reflector is CUL listed, and includes a 5-year warranty on the reflective materials. |
|
|
|
|
|
| Hydrofarm's XtraSun® 6-Inch AC Air Coolable Reflector measures 21 inches wide by 23.75 inches long by 8 inches high (excluding hangers) and weighs 19 pounds with the tempered lens. |
|
|
|
|
|
|
|
|
Order #VB6AC
Hydrofarm
XtraSun 6-Inch AC
Air Coolable
Horizontal HID Lamp Reflector
with Tempered Lens
109.95 |
|
Order #VBLENSYS
Hydrofarm
XtraSun Reflector
Replacement Tempered Lens
19.95 |
|
|
|
|
|
|
|
|
|
|
|
Cool Tube
Tubular
Lamp Reflector
Cool Tubes offer the most compact and effective way to get bright light over, or into, your growing area. |
|
|
|
|
|
|
As a result of their streamlined design, cooling airflow can move unimpeded, keeping growing area temperatures lower. The multi-point hanging system allows the unit to be used in a horizontal configuration (as shown) or hung vertically into the center of a growing area.
The quality construction features the best European reflective aluminum interior reflector for precise light direction over your growing area. The securely mounted 5KV mogul socket is completely prewired inside a protective wiring channel and junction box. Accepts all HID bulb types, sizes and wattages except oversize BT56 metal halide bulbs.
Included is the patented Lock and Seal 15-foot heavy duty lamp cord that allows you to connect the Cool Tube directly to any Hydrofarm Powerhouse or Xtrasun Remote Ballast.
Extra compact, the Cool Tube Tubular Lamp Reflector measures 6 inches in diameter by 19 inches in overall length. Use 6-inch diameter ducting, available here. |
|
|
|
|
|
|
|
Order #RFCOOL
Hydrofarm
Cool Tube
Horizontal HID Lamp Reflector
with 15-Foot Cord Set
129.95 |
|
|
|
|
|
|
|
|
|
|
|
 |
Pro Light
Horizontal HID
Lamp Reflector
by Hydrofarm®
Extremely lightweight construction combined with a superior lamp throw pattern, this reflector offers a lot of bang for the buck. |
|
|
|
|
|
Weighing less than four pounds, the Pro Light reflector easily adjusts to accomodate between 400 and 1000 watt bulbs in either halide or sodium. Eight-sided pecular pebblestone aluminum for maximum reflectivity with the most even distribution of any low-cost reflector on the market today. Comes complete with hanging hardware. Accepts Hydrofarm All System Cord Set, available here.
Reflector measures 5 3/4 inches high by 19 1/8 inches wide by 19 3/4 inches long. Weighs 5 pounds. Socket, bulb and ballast not included. |
|
|
|
|
|
|
|
Order #PROREFL
Hydrofarm
Pro Reflector
Horizontal HID Lamp Reflector
49.95 |
|
|
|
|
|
|
|
|
|
|
|
XtraSun®
Aluminum Wing
Horizontal HID
Lamp Reflector
by Hydrofarm®
Extremely lightweight construction combined with an excellent lamp throw pattern, |
 |
|
|
|
|
|
this reflector offers value and performance at an incredibly low price. The XtraSun® Aluminum Wing Reflector weighs in at a super lightweight four pounds and measures a compact 12 1/2 inches wide by 19 3/4 inches long by 6 1/2 inches high. Socket, bulb and ballast not included. Accepts Hydrofarm All System Cord Set, available here.
|
|
|
|
|
|
|
|
Order #VB2AW
Hydrofarm
XtraSun
Aluminum Wing
Horizontal HID Lamp Reflector
29.95 |
|
|
|
|
|
|
|
|
|
|
|
Reflector Vee Hangers
Replacement V shape hangers work with all Hydrofarm and Sunlight Supply reflectors, including the Daystar, Radiant, Super GrowWing, Growzilla, Sunburst, and Sun Systems VI and VII. Set of two hangers. |
|
|
|
|
|
|
|
|
Order #0011954
Reflector
V Hangers
Set of 2
2.95 |
|
|
|
|
|
|
|
|
|
|
|
SunRise
Reflector Hanging System
This hot new hanging system makes adjusting the height of your lamp reflector a snap! Provides easy vertical control of reflector position to maximize growth with proper light distance. Smooth up and down motion with very little effort required, yet your reflector will stay precisely at the height you determine.
Each reflector hanger will hold a maximum weight of 11 pounds. Two hangers are required for each reflector, with a maximum reflector weight of 22 pounds. Each kit includes 2 SunRise Hangers and stud hooks.
Reflector shown is not included. |
 |
|
|
|
|
|
|
|
Order #0981558
SunRise
Reflector Hanging System
19.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
